Multiax NE Machine
The Multiax NE machine is a moving bridge machine designed with the door distributor in mind. A feed through design that allows for easy loading and unloading. The CNC controlled fixture has pop up rollers and removable vacuum pods. The machine has a 4 axis spindle allowing full machining of doors including: sizing, beveling, trimming, easing, machining most styles of hinges and locks, lights, sweeps & peeps, and closures. Underneath machining within 6” of the edge can be completed without flipping the door. A complete 3D perimeter software package allows for programing from a system of drop down menus and libraries of different hardware with little to no programing experience required.
Equipped with a 13 HP Spindle and 7 Vertical and Four Horizontal
Independent Drill Unit
OSAI Open with Integrated PC
Traveling Automatic Tool Changer Magazine with 8 to 16 Tools
C Axis on Spindle Motor Allows for Rotational Axis Control of Aggregates
Optional Integrated Tool Touch Off
Underneath
Aggregate
4 Exit Horizontal
Aggregate
Special Door Fixture Includes:
• CNC Controlled Fixture Positioning to Adjust to the Door Width.
• Reference Stops Designed to Handle Overhanging Laminates.
• Pop Up Rollers for Easy Loading and Unloading.
• Removable Vacuum Pods When Performing Through Cutting.
• Center Rail Designed for Splitting Doors.
• Fixture Designed to Machine Up To a 48” x 120” Door.
• Able to Size, Bevel, Trim, and Machine Hinges, Lights, Sweeps,
Peeps, Closures, All Styles Locks, ETC.
Contact Us
We look forward to hearing from you…
MULTIAX AMERICA Inc.
3000 Remico Street St. SW – Grandville, MI 49418 – USA
Phone: +1 616.534.4530
Fax: +1 616.534.4570