NE SERIES Multiax America

NE SERIES

COMPACT MOVING BRIDGE > TWIN DRIVES

AerospaceAutomotiveHome + FurnitureThermoformingBoat Builders - MarineModel Makers

 

 The Multiax NE Series is a moving bridge machine designed with the door distributor in mind. A feed-through design that allows for easy loading and unloading. The CNC-controlled fixture has pop-up rollers and removable vacuum pods. The machine has a 4 axis spindle allowing full machining of doors including sizing, beveling, trimming, easing, and machining most styles of hinges and locks, lights, sweeps & peeps, and closures. Underneath machining within 6” of the edge can be completed without flipping the door. A complete 3D perimeter software package allows for programing from a system of drop-down menus and libraries of different hardware with little to no programming experience required. Download NE Series Brochure. 

Equipped with a 13 HP Spindle and 7 Vertical and Four Horizontal Independent Drill Unit

OSAI Open with Integrated PC

Axes Strokes  X 3,850 mm (151″)
                         Y 1,850 mm (72.8″)
                         Z 400 mm (15.7″)
                         C +/- 360° Continuous

Rapid Speeds  X 70 M/min. (2,756″)
                          Y 70 M/min. (2,756″)
                          Z 20 M/min. (787″)
                          C 30 RPM

Door Size:  Minimum 10″ x 30″
                   Maximum 48″ x 120″

Standard CNC: OSAI Open with Integrated PC

Standard Spindle: 13 hp, 1,000-24,000 RPM

Automatic Tool Changer: 12 Tools

Traveling Automatic Tool Changer Magazine with 8 to 16 Tools

Spindle-Motor

C Axis on Spindle Motor Allows for Rotational Axis Control of Aggregates

Optional Integrated Tool Touch Off

Underneath
Aggregate

4 Exit Horizontal
Aggregate

Special Door Fixture Includes:
• CNC Controlled Fixture Positioning to Adjust to the Door Width.
• Reference Stops Designed to Handle Overhanging Laminates.
• Pop Up Rollers for Easy Loading and Unloading.
• Removable Vacuum Pods When Performing Through Cutting.
• Center Rail Designed for Splitting Doors.
• Fixture Designed to Machine Up To a 48” x 120” Door.
• Able to Size, Bevel, Trim, and Machine Hinges, Lights, Sweeps,
Peeps, Closures, All Styles Locks, ETC.

Contact Us

We look forward to hearing from you…

1 + 3 =

MULTIAX AMERICA Inc.
3000 Remico Street St. SW – Grandville, MI 49418 – USA

Phone: +1 616.534.4530
Fax: +1 616.534.4570